Click the Verify Disk button in the Disk Utilities.

Select your drive on the left navigation panel (It's probably already selected).

After you've selected a language preference, Select the Disk Utility item in the list of utilities.

Continue holding the keys until the Recovery Utility prompts you to select a language (Grey Screen) **NOTE:**You may have to hold the keys for up to two minutes.

Hold down the Command+R keys as you start the device.

Just in case you pull off the rubber coating, you'll need a case removal tool like you use to replace a cell phone screen.

Recommend: A cold beer and a lot of patience.

New Hard drive that is compatible with Mac.

Mac running OSX Lion or later (prior versions didn't have the recovery partition).I've had little to no success with USB powered devices. Be sure to get one with external power source. SATA/IDE to USB Adapter (Mine was Vantec USB 2.0, but it shouldn't matter.Finally, on startup one day, he saw a progress bar that would complete and then the device would shut down. Initial Symptom: My husband's Mac had been randomly shutting down for some time, but we were limping it along. If your Mac is unable to access that feature, this may not work for you, but I included some other handy stuff, like recovering files from the drive. NOTE: This process only worked because the hard drive was still able to access recovery mode by holding Command+R on startup. Please use Common sense if I did this and look around the screen for something that looks like what I'm talking about.

I did most of this from memory, so I may have messed up a label here or there. This is probably overkill on instructions, but there are PC people out there who may try to help out the (much more) rare critical Mac issue. Hopefully I diagnosed a bad hard drive correctly (I'll provide my method) and I hope this helps someone out there. You can use internet recovery to do the same.Being a 1 Mac household and an IT professional who has only supported PCs, I had a challenging time trying to figure out how to reload OSX after my husband's Mac hard drive died. Now we can boot MacBook in recovery mode from a USB flash drive or internet and install the macOS. It should placed deep as possible.Īnd the last step is installing the SSD itself.Ĭool. Check compatibility with your computer.Īs a storage I decided to use 970 EVO Plus because it's reliability by customers feedback and ratings.Ĭomparison M.2 SSD with adapter and the original SSD for MacBook You can find the same by 'ssd m2 to macbook' search phrase. My Mac has an uncommon SSD connector with 12+18 pins. So I decided to install a new 1 TB.ġ0 screws at the bottom case, detach the battery and we can remove the SSD. 256 GB for photo and video editing is not enough. In some older version you can even upgrade a RAM or use the second one hard drive.īut in this story I am going to show you how to change the SSD. You can easily change a battery or upgrade a storage.

Replace macbook pro hard drive